Questionnaire for penstocks

Position: Project:

Medium:
	Surface water	Sea water
	Waste water	Drinking water
Others:

Design: (dimensions in mm)
lifting gate	descending sluice gate
round	DN:
rectangular	clear width:	clear height:
straight sole
rounded radius sole =
Special style:

Fitting depth:
From sole culvert	up to top edge of operating floor level	t=
	up tp axis hand wheel	k=

Water pressure:
Static:	Front side bar	Rear bar
	When operated bar

Fixing:
dowelled (anchored)	set in concrete	flange mounted	bolted
welded

Fixing parts:
compound anchor A4	steel screws zinc-plated	A2	A4

Materials:
Frame:	St 37-2	zinc-plated	1.4301	1.4571
Plate:	St 37-2	zinc-plated	1.4301	1.4571
	oak	bongossi	other:
Spindle:	1.4104	1.4305/A2	1.4571/A4
Seal:	soft sealing	PE seal	metallic sealing
	timber sealing	other:
standard parts (norm parts):	zinc-plated	A2	A4

Rust-proofing:
standard rust-proofing:	1 coat Inertol 49 W thick
special rust-proofing:	sand blasted SA 2,5 3 coats Inertol Poxitar SW	1 coat Friazinc R
spezial rust-proofing
for drinking water:	sand blasted SA 2,5 3 coats Icosit K 25 thick	1 coat Friazinc R 1 coat Icosit K 25

Drives:

Drive:
	above floor level
	below floor level
	mounted on cross beams on the frame guide rails
	mounted on a stand of the shaft cover
	with bearing block in shaft for anchoring
	with street cap
	single-spindle	dual-spindle	triple-spindle

manual drive
electric drive: voltage 400 V, 50 Hz	other voltage:

equipment:
tandem tourque switch	tandem limit switch
dual limit switch (for 2 addtional switching points)

4 single-throw switches
2 tandem for the end limits + 2 one-way for intermediate setting
2 single-throw switches for the end limits + 2 tandem for intermedate switching
4 tandem switches

position indicator	mechanical	potentiometer
	electronic	2 leads	4 leads
	Layout:	4-20 mA	0-20 mA
	local control	wall holder
	IP68 (submerssible 72 hours up to 0,6 bar)
Standard rust-proofing		spezial rust-proofing to combat aggressive atmospheres

Accessories: (dimensions in mm)
operating Key
electro motor sliding key (eTA-E)
wall passage (wall thickness and distance )
ceiling passage (ceiling thickness )
bevel gear
other:

Your inquiry from: 18.05.2012 Time:20.12

Adress
Customer ID:
Company name:	*
Name:	*
Contact:	*
Street:	*
PLZ,Place:	* *
Telefon:	*
Fax:	*
Email:	*
Remarks:	*

Please enter a correct email-adress!!! a copy of your inquiry will be sent to this adress if you click "Send!" !

© by Friedrich Köster GmbH&Co. KG, Heide 2000